Specifications

SL 486VE User's Manual
5.6 Add and Remove Boards
The ECU is menu-driven for ease of installation. There is also an extensive
online help facility which can be accessed at any time by pressing the
<F1 >key or by moving the cursor to the Help option at the top of the Main
Menu screen.
Use the cursor keys to move the menu bar to the "Step 2" and then press
< Enter >. The screen will display the following:
System - SL486VE EISA System Board
Slot 1 - Empty
Slot 2-Empty
Slot 3 - Empty
Slot 4-Empty
Slot 5-Empty
Slot 6 - Empty
Slot 7-Empty
Slot 8 - Empty
- Press INSERT to add a board that was not detected or has
not been installed yet.
- Press DEL to remove the selected board.
- Press F7 to move the selected board to a different slot.
- Press ESC when finished with this step.
[Select= ENTER] [Done=ESC] [Advanced Options=F9]
The Add and Remove Boards Screen allows you to edit the adapter card
configuration settings. You can change junction choice settings and resource
allocation settings by highlighting the adapter card to be modified and
pressing < Enter >
4-10