Specifications

EISA Configuration Utility
Step6 Exit
This step exits to the operating system. If any configuration
settings were changed, you are given the option of reboot-
ing the system so that the new settings will take effect.
5.4.2 Using Help
The help window may be accessed at any time by pressing the <F1> key
While in the help system you may scroll the window up and down using the
up and down cursor keys.
The help window includes a menu with three buttons at the bottom of the
window:
About AMI ECU Step2 (Add and Remove Boards)
Step3 (Change Configuration Settings)
Step4 (View Switch/Jumper Settings)
Step5 (Exit)
Back Press F2 to redisplay the last help topic that was shown.
Contents Press F3 to display the table of contents for the help system
help system.
Quit Press ESC to exit from the help system and return to the
ECU.
5-7