Specifications

SL 486VE User's Manual
5.4.1 Main Menu
The main menu outlines the six steps involved in configuringan EISA system.
Steps 1,2, and 3 are optional. To select a step, use the up and down cursor
keys to move to a step and then press < Enter > .You may also select a step
by pressing its item.
The following sample screen shows the ECU Main Menu.
EISA CONFIGURATION UTILITY, Release 2.01
p5j> b .flout Ш iitB%n:afbu
Step 2: Add and Remove Boards
Step 3: Change Configuration Settings
Step 4: Save Configuration
Step 5: View Switch/Jumper Settings
Step 6: Exit
[Select= Enter [Exit = ESC] [Help = F1] [Utilities = F9J
Step 1 About EISA Configuration
This step displays information for users who are new to
EISA and EISA configuration.
Step2 Add and Rempve Boards
This step is optional. Use this step to manuallyadd or delete
boards. Most boards are automatically detected and
added by the ECU.
Step3 Change Configuration Settings
This step is optional. Use this step to change configuration
settings for any board in the system. If you skip this step, all
setting will remain set to their default state.
Step4 Save Configuration
This step saves the
RAM and into a backup file (the CMS File).
This step saves the configuration^ettjng to EISA CMOS
Step5 View Switch/Jumper Settings.
This step displays hęwto set DIP switches and jumpers on
any board that is switch or jumper configurable.
4-6