Specifications

Built-in BIOS Setup Program
After pressing the current password , you can change the password stored
in the CMOS. The password can be at most 6 characters long.
To change the password, please follow the steps below:
4.7 BIOS Errors and Messages
After entering setup choices, the system will reboot. The setup summary and
system information will appear on screen along with messages. These may
include ERROR messages concerning the system or setup.
AMI BIOS performs various diagnostic tests at the time the system is turned
on. Whenever an error is encountered during these tests, there will be either
a few short beeps or an error displayed on the monitor. If the error occurs
before the display device is initialized, the system reports the error with
several short beeps.
If the error is FATAL, the system halts after reporting the FATAL error. If
the error is NON-FATAL, the process continues after reporting the error.
4-13