Specifications

SL 486VE User's Manual
Я DRAM Hidden Refresh
Recently the speed of DRAM is becoming faster so the time needed per
refresh cycle is getting shorter. The refresh cycle time for the 100ns DRAM
is 200ns minimum, for example. In a system with cache, most of the CPU
accesses are referred to the cache so that the DRAM usage (percent of time
the DRAM is accessed by the CPU) is significantly reduced.
В I/O Recovery Select
This field is used to specify the I/O command recovery time except for some
add-on card that cannot work properly. It is recommended to set this option
at low" value to enhance the I/O performance.
The available options are as follows:
о 3 BCLKs
. 4BCLKs
. 5BCLKs
. 11 BCLKs
4.6 Using the Change Password Setup
To change the password.choose the "ГН ANOF PASSWORD"option from
the Setup main menu and press < Enter > .
1. If the CMOS is bad or if this option has never been used, the user is
asked to enter new password. The screen will display the following
message:
Enter NEW Password:
If you want to disable the password function, you can press <En-
ter> key to return to the Main Setup menu.
2. If the CMOS is good or if this option has been used to enter the
password, the user is asked for the password stored in the CMOS.
The screen will display the following message:
Enter Current Password:
Enter the correct password and continue to change the password.
4-12