Specifications

Built-in BIOS Setup Program
Щ Base Memory and Extended Memory
A small section in the upper right corner of the screen displays important
status information on your system, including base and extended memory
amount. They are updated automatically by the Setup program according to
status detected by the BIOS self-test; no manual change is allowed.
4.4 Running the Advanced CMOS Setup
When you choose.the "RUN Advanced CMOS Setup" option in the Setup
main menu, the screen displays the following menu:
BIOS SETUP PROGRAM- ADVANCED CMOS SETUP
(C)1991 American Megatrends Inc., All Rights Reserved
Above 1 MB Memory Test : Disabled
Hard Disk Type 47 RAM Area : DOS 1KB
System Boot Up Num Lock : On
External Cache Memory : Enabled
Internal Cache Memory : Enabled
Password Checking Option : Setup
Video ROM ShadowС000.32К : Enabled
ESC:Exit 4- —»t <—: Sel (Ctrl)Pu/Pd:Modify F1:Help F2/F3:Color
F5:0ld Values F6:BI0S Setup Defaults F7:Power-On Defaults
ESC:Exit 4- —»t <—: Sel (Ctrl)Pu/Pd:Modify F1:Help F2/F3:Color
F5:0ld Values F6:BI0S Setup Defaults F7:Power-On Defaults
ESC:Exit 4- —»t <—: Sel (Ctrl)Pu/Pd:Modify F1:Help F2/F3:Color
F5:0ld Values F6:BI0S Setup Defaults F7:Power-On Defaults
Figure 4.4The Advanced CMOS Setup Program Screen
П Above 1 MB Memory Test
You can disable this option to bypass the memory test if a lot of memory is
installed in the system, or you can enable this option to test all the memory.
• Hard Disk Type 47 RAM Area
The purpose of this field is to specify the address of the memory area used
by the system BIOS for storing extended information, such as to save the user
definable drive type 47.
You have the following options:
. 0:300
To reserve the stack area at address 30h:0.
4-7