Specifications

Memory Configuration
Chapter 2
Memory Configuration
In this chapter, the SL 486VE DRAM configurations are discussed, followed
by instructions for DRAM module installation and removal. Users are recom-
mended to read through this chapter before installing or removing memory.
2.1 System Memory
The SL 486VE provides tremendous flexibility to support a number of different
on-board DRAM configurations. The on-board DRAM is installed with SIMM
(Single-In-Line Memory Module). There are two banks of DRAM module
slots seated on the SL 486VE to support up to 128 MB of on-board memory.
The location and layout of all the SIMM banks is illustrated below and shown
in Figure 3.1:
BANK 0
BANK 1
SIMM M
EIV
О RY
Each bank is composed of four standard 30-pin SIMM sockets. These sockets
take 256KB, 1MB, 4MB, 16MB SIMM.
2-1