User`s guide

T-MOPSlcdSA User's Guide
Appendix B: BIOS Operation 45
45
19.4 Advanced Menu
All entries in this part of the BIOS setup utility are vital to your system. Change settings only if you
are sure of what you are doing. Some changes may not be suitable for your complete system and
may lead to unwanted system behavior.
Feature Option Description
Advanced Settings
IDE Configuration
Submenu Opens IDE Configuration submenu, which allows you to
configure IDE devices.
Watchdog Submenu Opens Watchdog submenu, which allows you
to configure the watchdog timer.
Remote Access Configuration Submenu Opens Remote Access Configuration submenu,
which allows you to configure the AMIBIOS remote system.
(This is not the Kontron JRC feature!)
USB Configuration Submenu Opens USB Configuration submenu, which allows you
to configure the OHCI controller and USB devices.
Onboard Ethernet Enabled
Disabled
Enables/Disables the onboard
Davicom DM9102A Ethernet controller.
Notes: In the Option column, bold shows default settings.
19.4.1 IDE Configuration Submenu
Feature Option Description
IDE Configuration
OnBoard PCI IDE Controller Primary
Disabled
Disabled: disables the integrated IDE controller
Primary: enables the integrated IDE controller
Primary IDE Master
Submenu Opens Primary IDE Master submenu.
Primary IDE Slave
Submenu Opens Primary IDE Slave submenu.
Hard Disk Write Protect Disabled
Enabled
Write accesses through the BIOS can be enabled/disabled here;
accesses overriding the BIOS are not affected.
IDE Detect Time Out (Sec) 0 to 35 Enter the timeout value for the detection of ATA/ATAPI devices here.
Smaller values can speed up the boot process but increase the risk that
a connected device will not be detected.
When Type in the Master/slave submenus is set to Auto,
set this item to 35.
Notes: In the Option column, bold shows default settings.