User`s guide

T-MOPSlcdSA User's Guide
Parallel-Communication Interface 21
21
10.2 Configuration
The parallel-port mode, I/O addresses, and IRQs are changeable in the T-MOPSlcdSA BIOS Setup
Utility. You can program the base I/O-address 378h, 3BCh and 278h or disable the interface. You
can choose IRQ5 or IRQ7 as the parallel-port interrupt. In ECP mode, you can choose DMA 1 to DMA
3.
Refer to the “STPC Integrated IO Device Configuration Submenu” section in the “Appendix B: BIOS
Operation” chapter for configuration information.