Manual

Operation

Menu Reference

4.3.10 ASN Menu

The assign menu is accessible by pressing the

key. The menu

provides two screens for assigning a sensor input to the selected channel,

and specifying whether the HI and LO alarm contacts will be associated

with Channels 1 and 2 or Channels 3 and 4.

4.3.10.1 Sensor Input Assign

Assigns a sensor input to the selected channel. Use the

key to select the desired sensor input. The null selection

disconnects all sensor inputs from the selected channel. The same

sensor input may be assigned to multiple channels.

Use the

key to progress to the next screen.

4.3.10.2 Alarm Contacts

Assigns the HI and LO alarm contacts, available via the rear panel

connectors J5A and J5B, to either Channels 1 and 2, or Channels 3

and 4, respectively. See the Appendix for a pinout of the connectors.

4.3.11 MODE Menu

The MODE menu is activated by pressing the

key. The is

used to cycle the controller mode between the three possible selections

illustrated in the above menus: normal, auto-changeover, and pre-cool.

The selection is effective immediately. For more information regarding the

Ch 1: Assign

$ABCDø

Alarm Contacts:

$Ch 1&2 Ch 3&4

Controller Mode:

$Normal

Controller Mode:

$Auto-Changeover

Controller Mode:

$Pre-Cool