Manual

Rev. 3
47
6 Service Guide
The procedures in this section should only be performed by
Qualified Service Personnel (QSP).
6.1 Troubleshooting Procedures
The following paragraphs serve as an aid to assist QSP in troubleshooting
a potential problem with the Model 135/136. If the QSP is not comfortable
with troubleshooting the system, you may contact an Authorized AMI
Technical Support Representative for assistance. Refer to “
Additional
Technical Support
” on page 53.
This instrument contains CMOS components which are susceptible to
damage by Electrostatic Discharge (ESD). Take the following precautions
whenever the cover of the instrument is removed.
1.
2.
3.
4.
®
and other static
5.
6.
7.
8.
9.