User Manual

PARTS REQUIRED:

12 pcs - H6 Phillips Round Head Screw

2 pcs - P9 Ball Catcher

2 pcs - P10 Goal Box

2 pcs - P11 Ball Return Tube

STEP 3:

Center P10 Goal Box over the opening in the P2 End Apron and attach using pre-drilled pilot holes with H6 Screws as

shown in FIGURE 3. Tighten, but do not strip out H6 Screws.

Center P9 Ball Catcher over the opening in the P1 Side Apron and attach using pre-drilled pilot holes with H6 Screws

as shown in FIGURE 3. Tighten, but do not strip out H6 Screws.

Make sure the round opening for P11 Ball Return Tube is towards the floor (when table is turned upright).

Repeat for both ends of the table.

Attach P11 Ball Return Tubes between P9 Ball Catcher and P10 Goal Box as shown in FIGURE 3.

2014 Escalade Sports

For Customer Service Call 1-888-996-2729

FIGURE 3

NOTE: Make sure the round opening

for the ball return tube is towards the

floor (when table is turned upright)

P10

P11