User Manual

STEP 7:
Slide P13 5 Player Rod, P14 3 Player Rods and P15
2 Player Rod through Rod Bushings of one P1 Side
Apron as shown in FIGURE 7.
IMPORTANT NOTE: Please note the location of
the hole that is near one end of each rod.
This is the handle end of the rod.
Place one P17 Rod Washer, P16 Rod Bumper and
one P17 Rod Washer on each rod as shown in
FIGURE 7.
Place P19 Ivory Players ( ) on rod as shown in
FIGURE 7.
IMPORTANT NOTE: The goalie should be at
your left and your team (player face) facing to
the right. Looking ahead to FIGURE 8, DETAIL B
and FIGURE 9 - will help you with correct player
and rod handle assembly onto rods.
Place one P17 Rod Washer, P16 Rod Bumper and
one P17 Rod Washer on each rod as shown in
FIGURE 7.
= P16 Rod Bumper
= P17 Rod Washer
= P19 Ivory Player
STEP 8:
Align P19 Ivory Player to each player hole and attach using
H8 Bolts with H9 Lock Nut as shown in FIGURE 8 and
DETAIL B.
Attach P7 Rod End Caps to the rod as shown in
FIGURE 8.
Slide P6 Rod Handle onto each rod end with the
small hole shown in FIGURE 8.
Attach P6 Rod Handle using H10 Bolts as shown
in FIGURE 8.
Rod Bushing
Note: Rod Bushings are
already attached onto
each P1 Side Apron.
OVERHEAD VIEW
LOOKING DOWN ONTO TABLE
RIGHT
LEFT
FIGURE 7
Hole / Handle End
P15
2 Player Rod
P13
5 Player Rod
P14
3 Player Rod
P14
3 Player Rod
DETAIL B
P19
H8
H9
Rod
P6
Rod Handle
P6
Rod Handle
P7
Rod End Cap
FIGURE 8
Note:
Small
Hole
©
2014 Escalade Sports
For Customer Service Call 1-888-996-2729
10
All Rights Reserved.
PARTS REQUIRED:
H10
IMPORTANT NOTE: Soccerman should be in vertical
position while attaching P6 Handles.
13 pcs - H8 Phillips Round Head Bolt 4 pcs - P7 Rod End Cap 8 pcs - P16 Rod Bumper
13 pcs - H9 Nut 1 pc - P13 5 Player Rod 16 pcs - P17 Rod Washer
4 pcs - H10 Phillips Flat Head Bolt 2 pcs - P14 3 Player Rod 13 pcs - P19 Ivory Player
4 pcs - P6 Rod Handle 1 pc - P15 2 Player Rod