Instructions / Assembly

2"
FIGURE 1
Lay chair back and chair seat
on their side as shown.
FIGURE 2
Align predrilled holes.
FIGURE 3
Place arm assembly aligning
predrilled holes (as shown).
Insert bolts.
FIGURE 3-1
Add washer and 5/16" nuts to
back side of seat back and
seat. Tighten thoroughly.
FIGURE 4
Repeat same process on the
other side.
FIGURE 5
Attach base with 2" bolts by
inserting bolts from outside of
chair arms. (See Fig. 5-1 for
assembly detail.)
TOOLS NEEDED
• 1/2" open end wrench
• 3/16" Allen wrench
PARTS LIST
1 – chair back
1 – chair seat
2 – arm rests
and assemblies
1 – swivel base
assembly
2 – 4" bolts
4 – 3" bolts
4 – 2" bolts
10 – 5/16" nuts
10 – washers
4" BOLTS
NUTS
WASHERS
2" BOLTS
3" BOLTS
3"
3"
4"
3"
3"
4"
FIGURE 5-1
IMPORTANT: Put washer between
glide arm and pre-attached metal
glide base bracket. Tighten
thoroughly.
2"
WASHER
NUT
METAL
BRACKET
GLIDE
ARM
WASHER
NUT
Assembly Instructions
Fan Back Swivel Glider Chair
FAN BACK
SWIVEL GLIDER CHAIR