Instruction Manual MR-911C-SL Video Receiver With Bi-directional Sensornet Data © Copyright 2012, American Fibertek, Inc.
Table of Contents Functional Description ................................................................................. 3 Installation.................................................................................................... 3 Power Source .............................................................................................. 3 Power Connection........................................................................................ 3 Fiber Connection.......................................
INSTALLATION AND OPERATION INSTRUCTIONS INTRODUCTION Thank you for purchasing your American Fibertek MR-911C-SL singlemode video receiver. Please take a few minutes to read these installation instructions in order to obtain the maximum performance from this product. FUNCTIONAL DESCRIPTION The MR-911C-SL operates as half of a transmitter / receiver pair for the transmission of high performance 10 bit digital NTSC, PAL, RS170A, or RS343A video signals and bi-directional Sensornet data.
VIDEO INPUT CONNECTION The video input connection is made via a BNC connector. The video input should be connected to an appropriate 75 baseband video source such as a camera or a video recorder output. For optimum performance the video cables should be the shortest length of coax practical. SENSORNET INPUT / OUTPUT CONNECTIONS Data input and output connections are made via a terminal block on the right side of the unit.
VLI A bi-color LED indicator is provided for the video output of the MR-911C-SL. DC power and video status associated with this LED is summarized below. Video Presence LED Green Red Off DC Power Status On On Off Video Status Proper Output Video Present Output Video Not Detected Check Power Supply OLI A bi-color LED indicator monitors the optical input power that is being received at the MR-911C-SL from the MT-911C-SL or the RT-911C-SL.
LIFETIME WARRANTY INFORMATION American Fibertek, Inc warrants that at the time of delivery the products delivered will be free of defects in materials and workmanship. Defective products will be repaired or replaced at the exclusive option of American Fibertek. A Return Material Authorization (RMA) number is required to send the products back in case of return. All returns must be shipped prepaid. This warranty is void if the products have been tampered with.
