Instruction Manual DRBK-1 DIN Rail Adapter Bracket © Copyright 2013, American Fibertek, Inc.
INSTALLATION INSTRUCTIONS INTRODUCTION Thank you for purchasing your American Fibertek DRBK-1 DIN Rail Adapter Bracket. Please take a few minutes to read these installation instructions in order to obtain the maximum performance from this product. FUNCTIONAL DESCRIPTION The DRBK-1 provides DIN Rail mounting to a wide variety of American Fibertek fiber optic and network products. The DRBK-1 is sized to accommodate the 4¼” x 4¼” package.
INSTALLATION THIS INSTALLATION SHOULD BE MADE BY A QUALIFIED SERVICE PERSON AND SHOULD CONFORM TO THE NATIONAL ELECTRICAL CODE, ANSI/NFPA 70 AND LOCAL CODES. Place the DRBK-1 on a flat surface. Align the unit to be mounted with the four threaded holes on the plate. The unit may be mounted with the connectors facing up or down. It is recommended to face the optical connectors down to reduce the chance of dust or other foreign materials from entering the optical receptacle.
LIFETIME WARRANTY INFORMATION American Fibertek, Inc warrants that at the time of delivery the products delivered will be free of defects in materials and workmanship. Defective products will be repaired or replaced at the exclusive option of American Fibertek. A Return Material Authorization (RMA) number is required to send the products back in case of return. All returns must be shipped prepaid. This warranty is void if the products have been tampered with.
