Owner`s manual

28
CHANGING WHICH DATA ITEMS ARE DIS-
PLAYED IN THE STATUS SCREENS
Each device added to the remote (softener, drinking
water system, etc.) has a status screen which the
remote displays during normal operation. The status
screen may be customized by turning items on or off.
The softener’s status screen, for example, will include a
Status line and may also include any or all of the fol-
lowing optional data items:
Out of salt in (days)
Soft water left (gallons)
Soft water left (liters)
Average daily use (gallons)
Average daily use (liters)
Total minerals removed (lbs)
Total minerals removed (kg)
Capacity remaining (%)
Salt level
Total soft water (gallons)
Total soft water (m
3
)
Water used today (gallons)
Water used today (liters)
continued
4. Press the SELECT () button to display the Display
data screen (See Figure 114).
5. Press the DOWN () or UP () buttons to scroll
through the list of display data items. Items with a
check mark in the box next to them will be displayed
during normal operation.
6. To select an unchecked display data item, make sure
the box next to the item’s name is highlighted (box is
black inside). Then press the SELECT () button.
The check mark will appear in the box.
7. To un-select a checked display data item, make sure
the box next to the item’s name is highlighted (box is
black inside). Then press the SELECT () button.
The check mark will disappear.
8. When selections are complete, exit this menu by
pressing the LEFT () button. The display will go
back to the device menu (Figure 113).
9. Press the LEFT () button to exit this menu, or wait
30 seconds for it to exit automatically.
FIG. 113
FIG. 114
ECOWATER
SYSTEMS
Remote Operation
To turn data items on or off:
1. Press the remote’s LEFT () or RIGHT () buttons
to manually advance to the status screen you want to
customize. For example, to change the data for the
softener, manually advance to the Softener status
screen.
2. Press the remote’s SELECT () button to display the
device menu.
3. Press the DOWN () button to scroll through the
menu options until Display data is highlighted in a
box (See Figure 113).