Owner`s manual

20
FIG. 78
FIG. 79
SERVICE REMINDER
Use this feature to program the number of months (up
to 24) before a “Service overdue” message will appear
instead of the rolling status screens (See Figure 77).
This message also appears on the remote.
8. Press the UP () or DOWN () buttons to set the
number of months until the service reminder
appears. Repeatedly pressing the DOWN () but-
ton until the display reads “Off” turns this feature off
and zeros the number of months and days.
9. Press the SELECT () button. The display will go
back to the Special features menu (Figure 78).
10. Press the LEFT () button three times to return to
the rolling status screens.
6. Press the DOWN () button to scroll through the
menu options until Service reminder is highlighted.
7. Press the SELECT () button to display the Service
reminder screen (See Figure 79).
This will be a reminder to call your dealer for service.
Once it has been programmed, this screen displays the
number of months and days left until the service
reminder.
1. From any of the rolling status screens, press the
SELECT () button to display the Main menu.
2. Press the DOWN () button to scroll through the
menu options until Advanced settings is highlighted.
3. Press the SELECT () button to display the
Advanced settings menu.
4. Press the DOWN () button to scroll through the
menu options until Special features is highlighted.
5. Press the SELECT () button to display the Special
features menu (See Figure 78).
FIG. 77
SEND E.A.S.E. MESSAGE
With E.A.S.E. (Electronic Automated Service
Evaluation), a homeowner or service technician can
transmit operational data via a telephone for diagnostic
purposes. Ask your participating EcoWater Systems
dealer for more information.
To send an E.A.S.E. message:
1. From any of the rolling status screens, press the
SELECT () button to display the Main menu.
2. Press the DOWN () button to scroll through the
menu options until Advanced settings is highlighted.
3. Press the SELECT () button to display the
Advanced settings menu (See Figure 80).
FIG. 81
FIG. 82
6. Make sure Send EASE message is highlighted.
7. With the phone ready, press the SELECT () button
to display the Send EASE message screen and
begin transmission.
8. Hold the phone’s receiver an inch or two above the
E.A.S.E. port on the softener’s faceplate (See Figure
7 on Page 8). Maintain the receiver steadily in this
position during the entire transmission.
9. A bar is displayed showing the transmission’s
progress (See Figure 82). Once completed, the
Troubleshooting screen immediately reappears
(Figure 81).
10. Press the LEFT () button three times to return to
the rolling status screens.
FIG. 80
4. Press the DOWN () button to scroll through the
menu options until Troubleshooting is highlighted.
5. Press the SELECT () button to display the
Troubleshooting menu (See Figure 81).
ECOWATER
SYSTEMS
Conditioner Operation