Owner`s manual

CYCLE TIMES
Use these features to change the following softener
operations:
Backwash time
Second backwash (turn on or off)
Second backwash time
Fast rinse time
To display these screens:
1. From any of the rolling status screens, press the
SELECT () button to display the Main menu.
2. Press the DOWN () button to scroll through the
menu options until Advanced settings is highlighted
(See Figure 60).
FIG. 62
FIG. 63
6. Press the DOWN () button to scroll through the
menu options until the desired option is highlighted
(See list at the top of this column).
7. Press the SELECT () button to display the desired
information screen (See Figures 63-66).
8. See the right column on this page for specific
instructions on each cycle time screen.
9. Press the SELECT () button. The display will go
back to the Cycle times menu (Figure 62).
10. Press the LEFT () button three times to return to
the rolling status screens.
8a. Backwash time: Press the UP () or DOWN
() buttons to change the backwash time.
Hold the button down to rapidly advance. The
backwash time can be set from 1 to 30 min-
utes* (See Figure 63).
FIG. 61
4. Make sure Cycle times is highlighted.
5. Press the SELECT () button to display the Cycle
times menu (See Figure 62).
FIG. 60
3. Press the SELECT () button to display the
Advanced settings menu (See Figure 61).
FIG. 64
8b. Second backwash: If the desired option
already has a black dot next to it (See Figure
64), go to Step 9. Otherwise, press the DOWN
() or UP () buttons to scroll to the other
option, then press SELECT () to choose it.
Setting this feature On adds a second back-
wash and rinse at the beginning of the recharge
cycle. Default is Off. Set this feature On if your
water supply contains a lot of sediment or iron.
FIG. 65
8c. Second backwash time: Press the UP () or
DOWN () buttons to change the second back-
wash time. Hold the button down to rapidly
advance. The time can be set from 1 to 30
minutes (See Figure 65).
FIG. 66
8d. Fast rinse time: Press the UP () or DOWN
() buttons to change the fast rinse time. Hold
the button down to rapidly advance. The fast
rinse time can be set from 1 to 30 minutes*
(See Figure 66).
17
ECOWATER
SYSTEMS
Conditioner Operation
*Reducing the backwash and fast rinse times below a
softener model’s default settings can result in salty water
after recharges.