Release Notes VideoEdge® Hybrid Appliance Applicable Software VideoEdge Hybrid Appliance V4.5.1 (4.5.1.308) Product Data Visit the Network Video Recorders section of our web site – www.americandynamics.net – to download datasheets and other documentation in PDF format. August, 2014 Note In case of discrepancy, the information in this document supersedes the information in any document referenced herein.
Table of Contents Table of Contents .................................................................................................................................... 2 What’s in This Release ........................................................................................................................... 3 VideoEdge NVR V4.5.1 Software – What’s New ................................................................................ 3 Resource Management Enhancements .................................
What’s in This Release The following features and enhancements are part of this release. VideoEdge NVR V4.5.1 Software – What’s New This VideoEdge Network Video Recorder (NVR) is an upgrade version of the V4.5 released in June 2014. The upgrade to this version can only be done from the VideoEdge NVR V4.5. Note: In order to avoid serious data loss or corruption, it is imperative that a UPS is deployed on systems utilizing RAID cards without a battery backup.
- Using with the local VideoEdge client, the servers aggregate bit rate is reduced by half (i.e. 20 Mbps). NOTE: It is recommended when using the victor client, the user should be logged out if the local VideoEdge client. • • • This bundle server can support one POS (Point-of-Sale) IP text streaming option. This bundle server can support two Video Intelligence Analytics channels when connected to a victor client The following features are not supported with these new bundled servers.
Known Limitations and Issues The table below highlights known limitations or issues against the V4.5.1 VideoEdge Appliance and the V4.5.1 VideoEdge Client. Known limitations and issues may exist from previous releases. Please refer to the specific release for the appropriate information as well as the V4.5.1 VideoEdge release notes.
VideoEdge Appliance Description If you mount a Windows 7 share using Samba/CIFS you may run into “mount error(12): Cannot allocate memory” if you are using very large files on the Windows machine. Suggested Work-Around Refer to Microsoft technical details: Large Files are locking up Windows 7 32 bit and 64 bit. The solution is to make two registry edits and then restart a service: 1. Set “HKLM\SYSTEM\CurrentControlSet\Control\Ses sion Manager\Memory Management\LargeSystemCache” to “1″. 2.
VideoEdge Appliance Description Cameras that have been archiving, when deleted are no longer accessible through the device list. Auto discovery does not support IP address change if the cameras are on different physical LANs then the NVR NVR unable to resolve when added by Host name.
VideoEdge Appliance Description VE-Hybrid Error attempting to play video using a Bosch VJR-811-IWCV (AutodomeJR). Suggested Work-Around The Bosch Autodome Jr will not stream video in a victor surveillance window 2x2 if it is transcoded in to the resolution of 416x240 and connected to a Haswell NVR box. All other resolutions and transcodes will work as expected.
VideoEdge Client Description Suggested Work-Around VideoEdge Client - RTSP Port set to value other than 554 causes video not to stream when client's preference are set to AutoStart and AutoLogin Workaround is to log out of veLocalClient and login again. VideoEdge Client - viewer3 cannot see camera previews in camera menu No known workaround ''Video Stream Loss' is populated in VE Client when Snapshot in Discovery feature is clicked.
Contact Information If you have any questions regarding this Release Notes, please contact American Dynamics Technical Services at: Toll Free 1-800-507-6268, Option 2 International 1-561-912-6259, Option 2 Fax 1-450-444-2029 Email adtechservices@tycoint.com Web Site www.americandynamics.
