User`s guide

User’s Guide
46 Advanced Setup Using On-Screen Menus
OTHERS
This menu allows the user to check the RS-485 ID, communication protocol and
software version. In the Main Menu, move the cursor to 6 Others and press Enter. The
following sub menu will appear:
RS-485 ID Set Up
This item can only be accessed by the installer or using the password. Used to change
the RS-485 ID address of the multiplexer.
RS-485 Protocol
This menu shows the details of the RS-485 protocol. Baud rate allows you to select one
of the following options: 2400, 4800, 9600, 19200, 38400 bps. The installer can modify
the RS-485 ID address of the multiplexer (refer to RS-485 ID on page 55). Multiplexers
may be assigned a RS-485 ID address between 224 and 239. Each multiplexer must
have a unique address. The other settings are fixed, and can't be changed by the user
or installer.
Others
1 RS-485 ID Set Up 224
2 RS-485 Protocol
3 Software Information
4 Exit
RS-485 Protocol
1 Baud Rate : 9600bps
2 Bits : 8
3 Stop : 1
4 Parity : None
5 Exit