User`s guide

Triplex Digital Video Multiplexer
Advanced Setup Using On-Screen Menus 41
Motion Detection
This menu allows you to configure how Motion Detection works. The “Detect Area”
and “Sensitivity” can be defined individually for each camera. In the Alarm Set Up
Menu, move the cursor to 4 Motion Detect and press Enter. The following menu will
appear:
Motion Detect Use to enable or disable the motion detection function of
the multiplexer.
Configuration Table 2 An alternate entry to Configuration Table 2. See Schedule
Set Up on page 35 for the settings relevant to motion
detection.
Condition Set Up This menu allows you to set up the detection area and
sensitivity for each camera input.
Motion_Detect
1 Motion Detect OFF
2 Configuration Table 2
3 Condition Set Up
4 Exit
Condition Set Up
1 Camera_1 10 Camera_10
2 Camera_2 11 Camera_11
3 Camera_3 12 Camera_12
4 Camera_4 13 Camera_13
5 Camera_5 14 Camera_14
6 Camera_6 15 Camera_15
7 Camera_7 16 Camera_16
8 Camera_8 17 Exit
9 Camera_9