User`s guide

Triplex Digital Video Multiplexer
Advanced Setup Using On-Screen Menus 35
ALARM SET UP
Refer to Basic Alarm Features on page 19 for a technical introduction to the alarm
capabilities of the multiplexer. The following menus allow the user to configure how
alarm conditions are handled. In the Main Menu, move the cursor to 5 Alarm Set Up
and press Enter. The following menu will be displayed:
Schedule Set Up
The Alarm Processor allows you to define 2 time periods to create a schedule for
alarm operation: the Day Frame and the Night Frame. Each Frame has its own begin
and end times, and the motion detection setup of each camera can be defined
individually for each frame. The 16 Alarm In pins can also be individually enabled or
disabled for each frame.
Alarm Set Up
1 Schedule Set Up
2 Day/Night Switch
3 Alarm Response
4 Motion Detect
5 Alarm In
6 Video Loss Detect Dis
7 Alarm Set/Reset SW en
8 Release Time
9 Alarm List
10 Clear Alarm List
11 Exit
Schedule Set Up
1 Day Frame Set Up
2 Night Frame Set Up
3 Configuration Table 2
4 Exit