User`s guide

User’s Guide
32 Advanced Setup Using On-Screen Menus
VCR SET UP
Correct VCR setup is essential for the proper operation of the multiplexer and for
correct recording of encoded video. In the Main Menu, move the cursor to 4 VCR Set
Up and press Enter. The following menu will appear:
VCR Playback Set Up
When VCR playback video is shown on the Main Monitor, the picture quality can be
adjusted using this menu. This function can only be executed when there is at least
one window displaying VCR playback video, otherwise the message “-NOT VCR
MODE-” will appear. Using the Direction keys, adjust the following parameters to
obtain the best possible display quality for playback:
VCR Set Up
1 VCR Playback Set Up
2 VCR Source BNC
3 Rec Time 24Hr
4 VCR Rec Mode Field
5 Rec Density Standard
6 Interval 0.1998 sec
7 Sync-Trig Edge Fall
8 Playback Adjust Auto
9 VCR Input Check Off
10 Exit
VCR Playback Set Up
1 Bright 143 IIIIIIII
2 Contrast 159 IIIIIIII
3 Saturation 127 IIIIIIII
4 Hue 128 IIIIIIII
5 Exit