User`s guide

User’s Guide
28 Advanced Setup Using On-Screen Menus
CAMERA SET UP
This menu provides access to the configuration parameters that can be set for each
camera (select 3 from the Main Menu).
Configuration Table 1
There are seven parameters that can be configured for each camera. Of these, four can
only be accessed by the installer or using the password: Install, Covert, Terminal
Resistor, and Call Monitor sequence setup (see Enter Installer Set Up on page 51). The
default values for the parameters in Configuration Table 1 are as follows:
Camera Set Up
1 Configuration Table 1
2 Power ON Detect OFF
3 Exit
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
Install
9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9
Covert
Terminal Res
9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9
Gain Control 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8
Rec Priority 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
Alm Rec Prio 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8
Call Seq 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16