User`s guide

User’s Guide
14 Basic Operations
Assigning Cameras to Windows
Using the Set key, direction keys and camera select keys, a camera can be assigned to
each window. Once a camera has been assigned, playback images of that camera can
be viewed in the window by switching the window between live and VCR modes.
Step-by-step:
1. Press the Set key. The window cursor appears as a highlighted frame around one
of the windows, and the word SET appears on the OSD.
2. Move the window cursor to the desired window using the direction keys.
3. Press a camera select key to assign the camera to the selected window.
Viewing Live Cameras/VCR Playback
The Live/VCR key will switch the display between live cameras and VCR playback.
When the LED in the Live/VCR button is off, all the displayed windows contain live
video images. When the LED is lit, at least one window contains VCR playback.
Windows displaying VCR playback will have reversed OSD camera titles and
time/date stamps.
If you press the Live/VCR key when the window cursor is not displayed, all of the
windows will be switched between live and playback. If the window cursor is visible,
only the window selected by the cursor will be switched.
2x2 Digital Zoom
Any window can be zoomed, starting from one of the multiwindow view formats.
Step-by-step:
1. Press the Zoom key to show the window cursor. If the multiplexer is in sequence
mode, the first time Zoom is pressed, the sequence will stop and the display will
be in a multi-window view. Press Zoom again to obtain the window cursor.
2. Use the direction keys to move the cursor to the desired window.
3. Press the Zoom key once to switch to a full screen view of the selected window.
4. Press Zoom a second time to switch the display to a zoomed-in view of the same
window.
5. To move (pan/tilt) the zoomed area around the original image, use the direction
keys. Press Esc to exit zoom mode.