Specifications
SPEEDDOME ULTRA VI 8000-2830-03, REV. C
INSTALLATION AND SERVICE GUIDE 34 of 34
Field-of-View Formulas:
3.2mm* x distance from camera (m)
Focal length (mm)
= Horizontal view (m)
2.4mm* x distance from camera (m)
Focal length (mm)
= Vertical view (m)
* Horizontal scanning area of pickup device (mm) in camera.
** Vertical scanning area of pickup device (mm) in camera.
Example: Wide angle view with lens at 6mm and viewed
object at 10m.
3.2mm x 10m
6mm
= 5.33m Horizontal view (m)
2.4mm x 10m
6mm
= 4m Vertical view (m)
Declarations
Regulatory Compliance
Emissions............................... 47 CFR, Part 15,
Class A
ICES-003
EN55022 CL. B
EN61000-3-2
EN61000-3-3
AS/NZS 3548, Class A
CISPR 22
Immunity ................................ EN50130-4
Safety..................................... UL1950
CSA C22.2 No. 950
EN60950
IEC 950
FCC COMPLIANCE:
This equipment complies with Part 15 of the FCC rules for Class A
digital devices when installed and used in accordance with the
instruction manual. Following these rules provides reasonable
protection against harmful interference from equipment operated in a
commercial area. This equipment should not be installed in a
residential area as it can radiate radio frequency energy that could
interfere with radio communications, a situation the user would have
to fix at their own expense.
EQUIPMENT MODIFICATION CAUTION:
Equipment changes or modifications not expressly approved by
Sensormatic Electronics Corporation, the party responsible for FCC
compliance, could void the user's authority to operate the equipment
and could create a hazardous condition.
Other Declarations
WARRANTY DISCLAIMER:
Sensormatic Electronics Corporation makes no representation or
warranty with respect to the contents hereof and specifically disclaims
any implied warranties of merchantability or fitness for any particular
purpose. Further, Sensormatic Electronics Corporation reserves the
right to revise this publication and make changes from time to time in
the content hereof without obligation of Sensormatic Electronics
Corporation to notify any person of such revision or changes.
LIMITED RIGHTS NOTICE:
For units of the Department of Defense, all documentation and
manuals were developed at private expense and no part of it was
developed using Government Funds. The restrictions governing the
use and disclosure of technical data marked with this legend are set
forth in the definition of "limited rights" in paragraph (a) (15) of the
clause of DFARS 252.227.7013. Unpublished - rights reserved under
the Copyright Laws of the United States.
TRADEMARK NOTICE:
SpeedDome, Sensormatic, and the Sensormatic logo are registered
trademarks of Sensormatic Electronics Corporation. Other product
names (if any) mentioned herein may be trademarks or registered
trademarks of Sensormatic or other companies.
No part of this guide may be reproduced in any form without written
permission from Sensormatic Electronics Corporation.
MDR/BLS/CSD 11/2005