Technical data

SPEEDDOME ULTRA 8 CONFIGURATION UTILITY 8200-0600-01, REV. B
OPERATOR’S GUIDE
95 of 140
Figure 85. Dome Address Changed screen
Do one of the following:
• If you want to update the dome data from the base memory, highlight Update
Dome Data from Base, and then press FOCUS FAR. A screen briefly appears
that indicates the base memory is being updated (
Figure 86).
Figure 86. Restoring Dome Data screen
• If you want to clear the base data, highlight Clear Base Data, and then press
FOCUS FAR. This deletes all presets, patterns, and other configurations that
were stored in this IO base. A screen appears that indicates the base data is being
cleared (
Figure 87).
Restoring Dome Data
Names Buffer
TPB Buffer
DOME ADDRESS CHANGED!!
UPDATE DOME DATA FROM BASE
CLEAR BASE DATA