Technical data

SPEEDDOME ULTRA 8 CONFIGURATION UTILITY 8200-0600-01, REV. B
OPERATOR’S GUIDE
93 of 140
Figure 82. Calibration screen
Viewing Base IO Status Information
(Outdoor domes only) When Base IO Status is selected from the Dome Information screen,
the following screen is displayed and shows the base IO operating conditions and status. The
status information is automatically updated as it changes.
Note: This feature is only applicable to the Outdoor Housing IO board: P/N
0311-0124-xx.
Figure 83. Base IO Status screen
When you are finished viewing the base IO status, select Exit to return to the Dome
Information screen.
BASE IO STATUS
BASE App Version: 2.30
BASE Boot Version 2.22
Temp: 40.1 C
Humidity: 37 %
Blower 1: ON
Blower 2: ON
Alarm Bits: 00
EXIT
Position Cross-hair
To Target 1
Press Focus Far
To Calibrate
+