Technical data

SPEEDDOME ULTRA 8 CONFIGURATION UTILITY 8200-0600-01, REV. B
OPERATOR’S GUIDE
90 of 140
From this screen, you can identify the operating statistics for various features of the dome. The
information represents either runtime in seconds or number of occurrences (displayed in
hexadecimal values). The following table describes the abbreviations used.
Table 10. Dome Statistics screen abbreviations
Abbreviation Description
R
Time moving right in seconds.
L
Time moving left in seconds.
M
Total move time in seconds.
T
Total target count.
O
Operating time in seconds.
P
Power failure reset count.
W
Watchdog reset count. The watchdog tracks software problems that
cause the dome to hang. This number should be zero.
U
User reset count. This represents the resets initiated by the dome
operators.
When you are finished viewing the dome statistics, select Exit to return to the Dome
Information screen.
Updating IO Board Flash Memory
(Indoor and outdoor domes only) When Init IO Flash is selected from the Dome
Information screen, the following screen is displayed. It enables you to update the IO board
flash memory.
Figure 79. Updating base IO flash memory screen
INIT IO FLASH?
NO