Technical data

SPEEDDOME ULTRA 8 CONFIGURATION UTILITY 8200-0600-01, REV. B
OPERATOR’S GUIDE
63 of 140
3. Highlight Presets and press Focus Far to select. The Select Preset To Program
screen appears.
Figure 52. Select Preset to Program screen
4. Highlight the Preset Number field and press Zoom In/Out until your desired Preset
number appears.
5. Highlight Camera Functions and press Focus Far. One of the following Camera
Functions screens appears.
Figure 53. Camera Functions screen (35X camera dome)
CAMERA FUNCTIONS
Auto White Bal ON
IR MODE/nM Auto Mid /Visible
WDR OFF
AGC/Shutter Max Gain Limit
Open Shutter 28 dB 1/3 s
EIS OFF
RESET TO FACTORY SETTINGS
EXIT
SELECT PRESET TO PROGRAM
PRESET
NUMBER PRESET NAME
1 PRESET 1
SEQUENCE SETUP MENU
CAMERA FUNCTIONS
FOCUS FAR to program reset
EXIT