Technical data

SPEEDDOME ULTRA 8 CONFIGURATION UTILITY 8200-0600-01, REV. B
OPERATOR’S GUIDE
36 of 140
5. If you have selected Open Shutter and need to change the shutter limit setting, continue
below. Otherwise, continue with step 7.
6. Move the highlight to the Limit field. Change the setting. The following settings are
available:
• For NTSC cameras, the setting values range from 1/2 to 1/60.
• For PAL cameras, the setting values range from 2/3 to 1/50.
The default setting is 1/4 for NTSC and 1/3 for PAL.
7. Select Exit. The Dome Configuration Menu appears.
Setting Up Electronic Image Stabilization (EIS)
Note: The EIS feature is only available on 35X camera domes.
You can turn off EIS or adjust the EIS sensitivity level for 35X cameras on your system
through the Camera Functions screen.
Follow the steps below:
1. Access the Dome Configuration Menu (
Figure 26) by pressing Iris Open, Focus Far,
and Zoom Out on your controller.
Figure 26. Dome Configuration Menu
2. Use the joystick to highlight Camera Functions and press Focus Far to select. The
Camera Functions screen (
Figure 27) appears.
DOME CONFIGURATION MENU
PAN/TILT/ZOOM/SYNC OPTS
CAMERA FUNCTIONS
ALARMS/AREAS/HOME/PRESETS/PZ
ON-SCREEN TEXT DISPLAY
LANGUAGE / PASSWORD
DOME INFORMATION
RESET TO FACTORY SETTINGS
QUIT WITHOUT SAVING
EXIT AND SAVE CHANGES