Technical data

SPEEDDOME ULTRA 8 CONFIGURATION UTILITY 8200-0600-01, REV. C
OPERATOR’S GUIDE
93 of 138
Viewing Base IO Status Information
(Outdoor domes only) When Base IO Status is selected from the Dome Information screen,
the following screen is displayed and shows the base IO operating conditions and status. The
status information is automatically updated as it changes.
Note: This feature is only applicable to the Outdoor Housing IO board: P/N
0312-2124-03.
Figure 86. Base IO Status screen
When you are finished viewing the base IO status, select Exit to return to the Dome
Information screen.
Working With the Base IO Control Screen
(Outdoor domes only) When Base IO Control is selected from the Dome Information
screen, the following screen is displayed and shows the base IO firmware version, enables
firmware updates, and controls the camera dome blower and heater
Note: This feature is only applicable to the Outdoor Housing IO board: P/N
0312-2124-03.
BASE IO STATUS
BASE App Version: 2.30
BASE Boot Version 2.22
Temp: 40.1 C
Humidity: 37 %
Blower 1: ON
Blower 2: ON
Alarm Bits: 00
EXIT