Technical data

SPEEDDOME ULTRA 8 CONFIGURATION UTILITY 8200-0600-01, REV. C
OPERATOR’S GUIDE
89 of 138
From this screen, you can identify the operating statistics for various features of the dome. The
information represents either runtime in seconds or number of occurrences (displayed in
hexadecimal values). The following table describes the abbreviations used.
Table 10. Dome Statistics screen abbreviations
Abbreviation Description
R
Time moving right in seconds.
L
Time moving left in seconds.
M
Total move time in seconds.
T
Total target count.
O
Operating time in seconds.
P
Power failure reset count.
W
Watchdog reset count. The watchdog tracks software problems that
cause the dome to hang. This number should be zero.
U
User reset count. This represents the resets initiated by the dome
operators.
When you are finished viewing the dome statistics, select Exit to return to the Dome
Information screen.
Initializing Dome
When Init Dome is selected from the Dome Information screen, the following screen is
displayed. It enables you to initialize the dome to factory defaults.
Figure 81. Init Dome screen
Do one of the following:
• If you want to clear all user-programmed data and set the dome to factory defaults, select
YES to start initialization. When you choose Yes, a screen is displayed that indicates the
INIT DOME?
NO