Technical data

SPEEDDOME ULTRA 8 CONFIGURATION UTILITY 8200-0600-01, REV. C
OPERATOR’S GUIDE
84 of 138
Figure 74. Change Language screen
Note: Changing the language does not alter any previously programmed names.
Only default names, such as Preset 1, change to the new language setting
4. Select Exit to return to the Dome Configuration Menu.
Setting and Enabling the Dome Password
To prevent unauthorized use of the configuration utility, you may choose to enable password
protection. There are two parts to using passwords with your dome: setting a password and
enabling password use. The dome password can be from 1 to 8 characters long. The characters
available depend on the current language setting.
Setting or Changing the Dome Password
1. Select Language/Password from the Dome Configuration Menu.
2. Select Set Password.
The Set Password screen appears.
Change Language
Please Wait