Technical data

SPEEDDOME ULTRA 8 CONFIGURATION UTILITY 8200-0600-01, REV. C
OPERATOR’S GUIDE
78 of 138
4. The Select Name to Program screen appears.
Figure 68. Select Name to Program screen
5. Press Zoom to change the number. When the item whose name you want to change
appears press Focus Far.
Note: If Presets, Patterns, or Areas have been programmed, the dome
automatically points to the starting position of the associated selection each time
the number is advanced.
6. The Name Programming screen appears.
Figure 69. Example Name Programming Screen
7. Move the blinking highlight around the available characters. When the correct character is
highlighted, press Focus to select it.
If you make a mistake, Zoom In moves the cursor one space right, and Zoom Out moves
the cursor one space left in the name.
NAME PROGRAMMING
NAME: ALARM 1
ABCDEFGHIJKLMNOPQRST
UVWXYZabcdefghijklmn
opqrstuvwxyz 0123456
789/-
UNDO CHANGES AND QUIT
EXIT
SELECT NAME TO PROGRAM
NUMBER CURRENT NAME
1
FOCUS FAR to program names
EXIT
Blank Space
character