Technical data

SPEEDDOME ULTRA 8 CONFIGURATION UTILITY 8200-0600-01, REV. C
OPERATOR’S GUIDE
76 of 138
Changing the Display of Direction Indicators
1. Select On-Screen Text Display from the Dome Configuration Menu.
2. Move the highlight to Direction Indicator.
3. Change the setting.
• Select On to display the direction information.
• Select Off to prevent the direction information from displaying.
The default setting is Off.
4. Select Exit. The Dome Configuration Menu appears.
Configuring the Display of Name Information
Use the Name Configuration Menu to select which name information appears on-screen. To
display this screen, select Name Configuration Menu from the On-Screen Text Display
screen. The following screen appears:
Figure 67. Name Configuration Menu
You can choose to enable or disable the display of camera, area, preset, pattern, and alarm
names from this screen. You can reset all programmable names to their default settings. You
may also initiate name programming from this screen. See
Assigning or Changing Name
Information on page
77.
Changing the Display of Selected Name Information
1. Select On-Screen Text Display from the Dome Configuration Menu.
2. Select Name Configuration Menu.
The Name Configuration Menu appears.
3. Move the highlight bar to the item whose display setting you want to change.
4. Change the setting.
• Choose On to display name information on the monitor.
NAME CONFIGURATION MENU
CAMERA NAME OFF
AREA NAME OFF
PRESET NAME OFF
PATTERN NAME OFF
ALARM NAME ON
FOCUS FAR to program names
RESET PROGRAMMABLE NAMES
EXIT