Technical data

SPEEDDOME ULTRA 8 CONFIGURATION UTILITY 8200-0600-01, REV. C
OPERATOR’S GUIDE
70 of 138
Performance Notes
Keep the following considerations in mind when using the SpeedDome Ultra 8 camera dome
in the AD-UTC environment:
Address Setting
The camera dome must be set to address 891 to operate in the AD-UTC environment. When
the dome initializes or resets, the address and protocol information (UTC_T) appear on-screen.
Accessing the DirectSet Menu
The DirectSet Menu provides easy access to specific camera dome functions from the
keyboard. To access the DirectSet menu, select the dome, and then press the DirectSet or Info
button (varies by controller) to display the menu.
Refer to the
Accessing the DirectSet Menu on page 12 for detailed information.