Technical data

SPEEDDOME ULTRA 8 CONFIGURATION UTILITY 8200-0600-01, REV. C
OPERATOR’S GUIDE
68 of 138
AD-UTC Command Summary
Table 7 lists the commands to operate the configuration utility in AD-UTC environment. The
keyboard must be in programming mode to perform these functions.
Table 7. AD-UTC commands summary
Command Function
F
, +
(Function, and then
Shift+Menu)
Start the configuration utility.
Joystick
(Pan/Tilt)
Move the highlight bar on the active menu.
(Focus Far)
Or
(Focus Near)
Select the highlighted item on the active menu.
(Zoom In) or Twist
joystick clockwise
Increase the value of the selected setting.
Display the next choice for the setting.
(Zoom Out) or Twist
joystick counterclockwise
Decrease the value of the selected setting.
Display the previous choice for the setting.
F
, +
(Function, and then
Shift+Clear)
Save changes and exit the utility from any screen.
When setting names or entering password information, the screen displays the available
characters in the selected language.
Table 8 provides the name programming and password
entry commands:
Table 8. Name Programming/Password Entry Commands
Command Function
Joystick Left/Right Move the highlight left or right in the character field.
Joystick Up/Down Move the highlight up or down in the character field.
(Focus Far)
Or
(Focus Near)
Select the highlighted character in the character field.
(Zoom In) or Twist
joystick clockwise
Move the cursor to the right of the current character in
the name or password.
(Zoom Out) or Twist
joystick counterclockwise
Move the cursor to the left of the current character in
the name.