Technical data

SPEEDDOME ULTRA 8 CONFIGURATION UTILITY 8200-0600-01, REV. C
OPERATOR’S GUIDE
66 of 138
A random scan pans randomly between the left and right scan limits. For example, the scan
may start at point in the scan, then pan right 40° and pause, pan right 10° and pause, pan left
20° and pause, and pan right until it reaches the right scan limit.
Figure 59 illustrates a random
scan. In this figure, the dashed line represents the scan area, and the solid line represents the
scan pattern. The circle on the scan represents the start point. Each arrowhead represents a
pause. “X” represents a change in direction.
Figure 59. Random Scan
Programming Scan Limits
Note: For all types of scans, the current camera tilt and zoom settings are used
when the scan is activated. Any changes of tilt or zoom during the programming
of the scan limits are ignored.
1. Select Alarms/Areas/Home/Presets/PZ from the Dome Configuration Menu.
2. Select Scan Limits.
1. Random scan starts
2. First pause.
3. Second pause.
Change direction.
4. Third pause.
Change direction.
5. Right scan limit reached.
Change direction.
Dome
Left Scan
Limit
Right Scan
Limit
Parking
Lot
Building