Technical data

SPEEDDOME ULTRA 8 CONFIGURATION UTILITY 8200-0600-01, REV. C
OPERATOR’S GUIDE
63 of 138
To begin monitoring motion detection, call the Preset to which motion detection has been
applied.
Note: Motion detection is not guaranteed to capture 100% of all activity. Motion
detection can be hidden without erasing the motion detection configuration (for
example, during the day when motion is expected). To hide motion detection,
select Yes on the Hide All Zones field on the Motion Detection Setup
screen (
Figure 53 on page 61).
13. To change a camera function, highlight Camera Functions and press Focus Far. One
of the following Camera Functions screens will appear.
Figure 55. Camera Functions screen (35X camera dome)
Figure 56. Camera Functions screen (22X camera dome)
14. Make your desired changes.
CAMERA FUNCTIONS
Auto White Bal ON
IR MODE/nM Auto Mid /Visible
WDR OFF
AGC/Shutter Max Gain Limit
Open Shutter 26 dB 1/3 s
EIS OFF
RESET TO FACTORY SETTINGS
EXIT
CAMERA FUNCTIONS
Auto White Bal ON
AGC/Shutter Max Gain Limit
Open Shutter 28 dB 1/3 s
RESET TO FACTORY SETTINGS
EXIT