Technical data

SPEEDDOME ULTRA 8 CONFIGURATION UTILITY 8200-0600-01, REV. C
OPERATOR’S GUIDE
61 of 138
Figure 52. Select Preset to Program screen
4. Highlight the Preset Number field, and press Zoom In/Out until your desired Preset
number appears.
5. To set up motion detection, highlight Motion Detection Setup, and press Focus Far.
The Motion Detection Setup screen appears (
Figure 53). If motion detection is not
required for the preset, skip to step 12.
Figure 53. Motion Detection Setup screen
6. The Preset number field is highlighted. Press Zoom In/Out until the Preset number you
want to use for this motion detection setup (1-96) appears.
7. Use the joystick to highlight the Zone field. Press the Zoom In/Out button until the zone
number (1-8) you want to apply to the Preset appears.
8. Highlight the Sens field. Press the Zoom In/Out button until the sensitivity level you
want to apply to your zone appears.
MOTION DETECTION SETUP
1
ZONE SENS ACTION
1 0 NO ACTION
HIDE ALL ZONES NO
DELETE ALL ZONES
UPDATE SENS AND ACTION
FOCUS FAR to prog zone
EXIT
SELECT PRESET TO PROGRAM
PRESET
NUMBER PRESET NAME
1 PRESET 1
MOTION DETECTION SETUP
SEQUENCE SETUP MENU
CAMERA FUNCTIONS
FOCUS FAR to program preset
EXIT