Technical data

SPEEDDOME ULTRA 8 CONFIGURATION UTILITY 8200-0600-01, REV. C
OPERATOR’S GUIDE
58 of 138
2. Highlight On-Screen Text Display and press Focus Far to select. The On-Screen
Text Display screen appears.
Figure 48. On-Screen Text Display screen
3. Highlight the Pattern Select field and press Zoom In/Out to select OFF, 3, or 16.
4. Highlight Exit and press Focus Far to select. The Dome Configuration Menu appears.
5. Highlight Exit and Save Changes and press Focus Far to save.
Recording Patterns When Configured for 16
Recording Patterns when the Pattern Select field is set for OFF, 3, or 16 is accomplished
through keyboard commands (consult your keyboard user guide). However, additional steps
are required when the Pattern Select field is set for 16.
Note: If the controller being used supports the use of 16 Patterns, the 16 Pattern
Feature will execute patterns 1–16 automatically.
Follow the steps below to record 16 variable-speed Patterns:
1. Enter the appropriate keyboard commands to record a Pattern, using 1, 2, or 3 as your
Pattern number (consult your keyboard user guide for specific steps.). The Pattern Select
screen (
Figure 49) appears.
ON-SCREEN TEXT DISPLAY
STATUS DISPLAY ON
DISABLE ALL NAMES? NO
DIAGNOSTICS DISPLAY ON
DIRECTION INDICATOR ON
PATTERN SELECT OFF
NAME CONFIGURATION MENU
TEXT ATTRIBUTE OPTIONS
EXIT