Technical data

SPEEDDOME ULTRA 8 CONFIGURATION UTILITY 8200-0600-01, REV. C
OPERATOR’S GUIDE
56 of 138
Figure 45. Alarms/Areas/Home/Presets/PZ screen
3. Highlight Set Home Position and press Focus Far. The Set Home Position screen
appears.
Figure 46. Set Home Position screen
4. On the highlighted Action field, press Zoom In/Out until Sequence appears.
5. Highlight the number field. Press Zoom In/Out until your desired Sequence number
appears.
6. Highlight the Return Time Mins field. Press Zoom In/Out to specify when the dome is
to return to its home position after a period of inactivity (1-60 min.). This triggers the
Sequence to run.
7. Highlight the Exit field and press Focus Far to select.
8. Continue to exit until the completely out of all programming menus.
SET HOME POSITION
ACTION PRESET 1
RETURN TIME MINS 10
EXIT
ALARMS/AREAS/HOME/PRESETS/PZ
SET ALARM ACTIONS
SET ALARM STATES
SET HOME POSITION
SET NORTH POSITION
AREA BOUNDARIES
PRIVACY ZONES
PRESETS
SCAN LIMITS
EXIT