Technical data

SPEEDDOME ULTRA 8 CONFIGURATION UTILITY 8200-0600-01, REV. C
OPERATOR’S GUIDE
54 of 138
Figure 42. Select Preset to Program screen
4. Highlight Sequence Setup Menu and press Focus Far. The Sequence Setup Menu
screen appears.
Figure 43. Sequence Setup Menu screen
5. Highlight the Sequence Number field. Press Zoom In/Out to change values (1-16).
6. Highlight the Step field. Press Zoom In/Out to scroll through available steps. Steps are
displayed in groups of 1-4, 5-8, 9-12, and 13-16.
7. Highlight the Preset field and press Zoom In/Out until the desired Preset number
appears (1-96).
8. Highlight the Dwell Time Min field and press Zoom In/Out until the number of minutes
you want the Preset to remain on-screen appears (0-10 minutes).
9. Highlight the Dwell Time Sec field and press Zoom In/Out until the number of seconds
you want the Preset to remain on-screen appears (0-60 seconds in 10-second increments).
SEQUENCE SETUP MENU
SEQUENCE NUMBER 1
STEP 1-4 DWELL TIME
STEP PRESET MIN / SEC
1 0 0 0
2 0 0 0
3 0 0 0
4 0 0 0
EXIT
SELECT PRESET TO PROGRAM
PRESET
NUMBER PRESET NAME
1 PRESET 1
MOTION DETECTION SETUP
SEQUENCE SETUP MENU
CAMERA FUNCTIONS
FOCUS FAR to program preset
EXIT