Technical data

SPEEDDOME ULTRA 8 CONFIGURATION UTILITY 8200-0600-01, REV. C
OPERATOR’S GUIDE
51 of 138
To ensure that the correct Privacy Zone is deleted, place the arrows clearly in the zone you
want to delete.
Figure 39 illustrates a valid selection.
Figure 39. Deleting Privacy Zone – Valid Selection
By moving to the left, the arrows stop blinking when the target area enters Zone 1. Pressing
Zoom allows you to delete Zone 1. If you do not want to delete the zone, press Focus
Note: Once you delete a zone, pressing Focus saves and exits the Delete
Privacy Zones screen.
Deleting Specific Privacy Zones
To delete individual Privacy Zones, use the following procedure. To delete all Privacy Zones,
see
Deleting All Privacy Zones.
1. Select Alarms/Areas/Home/Presets/PZ from the Dome Configuration Menu.
2. Select Privacy Zones.
The Program Privacy Zones screen displays.
3. Select Delete Specific Zones.
4. Position the arrows in the Privacy Zone that you want to delete. Press Zoom to delete. If
you do not want to delete the zone, press Focus.
5. Repeat steps 3 and 4 for each Privacy Zone you want to delete. When finished, select Exit.
6. When the Alarms/Areas/Home/Presets/PZ screen appears, select Exit. The Dome
Configuration Menu appears.
Deleting All Privacy Zones
To delete all Privacy Zones, use the following procedure. To delete individual Privacy Zones,
see
Deleting Specific Privacy Zones.
1. Select Alarms/Areas/Home/Presets/PZ from the Dome Configuration Menu.
2. Select Privacy Zones. The Program Privacy Zones screen displays.
3. Select Delete All Zones.
Navigate zone
ZOOM to delete zone
FOCUS quits w/o changing
Zone 1
Zone 2
Zone 3
Arrows stop blinking
indicating this is a
valid selection.