Technical data

SPEEDDOME ULTRA 8 CONFIGURATION UTILITY 8200-0600-01, REV. C
OPERATOR’S GUIDE
37 of 138
Chapter 4: Configuring Alarms, Areas, Home, Privacy Settings,
Presets and Scan Limits
This chapter describes settings associated with Alarms, Areas, the Home Position, Privacy
Zones, Presets and Scan Limits. It explains how to set a default action to run when a dome
alarm occurs, as well as how to define the normal alarm input states. It describes how to set a
default position for the dome and assign a dome position that corresponds with North. It also
explains how to program Areas, Privacy Zones, Presets and Scan Limits.
When Alarms/Areas/Home/Presets/PZ is selected from the Dome Configuration Menu,
the following screen appears:
Figure 28. Alarms/Areas/Home/Presets/PZ screen
From this menu you can choose to configure alarm actions, configure normal states for alarm
inputs, assign the “home position,” establish the north position for the dome, set area
boundaries, set privacy zones, and program presets.
• To make changes, select a menu item to display the associated settings.
• To change the settings, move the highlight bar to appropriate field and make the changes.
• To return to the Dome Configuration Menu, select Exit.
ALARMS/AREAS/HOME/PRESETS/PZ
SET ALARM ACTIONS
SET ALARM STATES
SET HOME POSITION
SET NORTH POSITION
AREA BOUNDARIES
PRIVACY ZONES
PRESETS
SCAN LIMITS
EXIT