Technical data

SPEEDDOME ULTRA 8 CONFIGURATION UTILITY 8200-0600-01, REV. C
OPERATOR’S GUIDE
26 of 138
Chapter 3: Configuring Camera Features
This chapter describes the settings used to control the camera features. It describes how to
change the white balance settings, IR mode, wide dynamic range settings, automatic gain
control (AGC), and open shutter settings to improve camera performance.
Note: The IR mode, WDR, and EIS features are only available on 35X camera
domes. These features do not appear on the 22X camera dome Camera Functions
menu.
When Camera Functions is selected from the Dome Configuration Menu, one of the
following screens appears:
Figure 17. Camera Functions screen (35X)
Figure 18. Camera Functions screen (22X)
CAMERA FUNCTIONS
Auto White Bal ON
AGC/Shutter Max Gain Limit
Open Shutter 28 dB 1/3 s
RESET TO FACTORY SETTINGS
EXIT
CAMERA FUNCTIONS
Auto White Bal ON
IR MODE/nM Auto Mid /Visible
WDR OFF
AGC/Shutter Max Gain Limit
Open Shutter 26 dB 1/3 s
EIS OFF
RESET TO FACTORY SETTINGS
EXIT