Technical data

SPEEDDOME ULTRA 8 CONFIGURATION UTILITY 8200-0600-01, REV. C
OPERATOR’S GUIDE
25 of 138
Note: The Camera Functions auto return feature is only available on 35X camera
domes and does not appear on the 22X camera dome Return to Auto screen.
Figure 16. Return to Auto screen (22X)
4. Use the joystick to highlight each field (Focus, Iris, and Camera Functions). Select
either On or Off as your global camera default setting for each field.
5. Use the joystick to highlight Exit, and press Focus Far to select. When you reach the
Dome Configuration Menu, highlight Exit and Save Changes, and press Focus Far.
Note: The Reset to Factory Settings field resets only the fields on the Return
To Auto screen.
RETURN TO AUTO
FOCUS ON
IRIS ON
RESET TO FACTORY SETTINGS
EXIT