Technical data

SPEEDDOME ULTRA 8 CONFIGURATION UTILITY 8200-0600-01, REV. C
OPERATOR’S GUIDE
12 of 138
IMPORTANT
The following settings do not restore when selecting Quit Without Saving from the
Dome Configuration Menu: Area Boundaries and AGC/Shutter Limit.
Accessing the DirectSet Menu
The DirectSet Menu provides easy access to commonly used SpeedDome Ultra 8 camera dome
features when used with compatible controllers. This allows you to change or activate features
without starting the dome configuration menu. Four pages of menu options are available for
the 35X camera dome (
Figure 3 through Figure 6 below) and the 22X camera dome (Figure 7
through
Figure 10 on page 14).
Note: Some DirectSet menu features are not supported by the 22X camera dome.
Each menu feature description in
Table 2 beginning on page 15 shows which
camera dome supports that feature.
Figure 3. DirectSet Menu (35X)–Page 1 of 4
0 TOGGLE DIRECT SET MENU
1 DOME CONFIG MENU
2 AUTO IRIS & AUTO FOCUS
3 FLIP
4 PEEL PATTERN
5 SET NORTH POSITION
6 LINE LOCK OFF
7 LINE LOCK ON
10 NIGHT MODE
FOCUS FAR=next page